BoYue Industrial (Shanghai)Co., Ltd.
BoYue Steel China Co.,Ltd BoYue&Tianda Oil Pipe Co., Ltd BoYue Industry (ShangHai) Co., Ltd BoYue & BaoSteel Pipeline Equipment Co.,Ltd
Add to Cart
ASTM B564 / ASME SB564 Threaded Pipe Flange 24" 900# NICKEL ALLOY STEEL Inconel625 UNS N06625
About Inconel 625 Flanges
Hastelloy Inconel 625 Pipe Flanges Chemical Composition
| Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr |
| Inconel 625 | 0.10 max | 0.50 max | 0.50 max | 0.015max | – | 5.0 max | 58.0 min | 20.0 – 23.0 |
Inconel 625 Plate Flanges Mechanical Properties
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Inconel 625 | 8.4 g/cm3 | 1350 °C (2460 °F) | Psi – 1,35,000 , MPa – 930 | Psi – 75,000 , MPa – 517 | 42.5 % |
Equivalent Grades for Inconel 625 Industrial Pipe Flanges
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR |
| Inconel 625 | 2.4856 | N06625 | NCF 625 | NA 21 | ХН75МБТЮ | NC22DNB4MNiCr22Mo9Nb |
| Type | Flange/Forgings/Discs/Rings/Shaft/Sleeves |
| Standard | ANSI B16.5, ANSI B16.47, MSS SP-44 or as per the customers' request or drawing |
| Size | 1/2''~72'' |
| Class Rating | 150#~2500# |
| Facing | RF(raised face);FF(flat face);RTJ(ring type joint);RJ(ring joint face) TG(tongue and groove face);MFM(male and female face) |
| Manufacturing process | Push, Press, Forge, Cast, etc. |
|
Material
Carbon steel Stainless steel Alloy steel Duplex stainless steel Nickel alloy steel | Carbon steel, stainless steel, alloy steel |
| ASTM A694 F42,F46,F48,F50,F52,F56,F60,F65,F70; ASTM A105; ASTM A350 LF1, LF2 CL1/CL2, LF3 CL1/CL2; ASTM A266 GR.1,GR.2,GR.3,GR.4 | |
| ASTM A182 F 304, 304L, 304H, 309S, 309H, 310S, 310H,316, 316Ti,316L,317, 317L, 321, 347,347H,348 | |
| ASTM A182 F5, F5a , F9, F11, F12, F22, F91; | |
| Nickel Alloy Steel: Alloy 200/Nickel 200/NO2200/2.4066/ASTM B366 WPN; Alloy 201/Nickel 201/NO2201/2.4068/ASTM B366 WPNL; Alloy 400/Monel 400/NO4400/NS111/2.4360/ASTM B366 WPNC; Alloy K-500/Monel K-500/NO5500/2.475; Alloy 600/Inconel 600/NO6600/NS333/2.4816; Alloy 601/Inconel 601/NO6001/2.4851; Alloy 625/Inconel 625/NO6625/NS336/2.4856; Alloy 718/Inconel 718/NO7718/GH169/GH4169/2.4668; Alloy 800/Incoloy 800/NO8800/1.4876; Alloy 800H/Incoloy 800H/NO8810/1.4958; Alloy 800HT/Incoloy 800HT/NO8811/1.4959; Alloy 825/Incoloy 825/NO8825/2.4858/NS142; Alloy 925/Incoloy 925/NO9925; Hastelloy C/Alloy C/NO6003/2.4869/NS333; Alloy C-276/Hastelloy C-276/N10276/2.4819; Alloy C-4/Hastelloy C-4/NO6455/NS335/2.4610; Alloy C-22/Hastelloy C-22/NO6022/2.4602; Alloy C-2000/Hastelloy C-2000/NO6200/2.4675; Alloy B/Hastelloy B/NS321/N10001; Alloy B-2/Hastelloy B-2/N10665/NS322/2.4617; Alloy B-3/Hastelloy B-3/N10675/2.4600; Alloy X/Hastelloy X/NO6002/2.4665; Alloy G-30/Hastelloy G-30/NO6030/2.4603; Alloy X-750/Inconel X-750/NO7750/GH145/2.4669; Alloy 20/Carpenter 20Cb3/NO8020/NS312/2.4660; Alloy 31/NO8031/1.4562; Alloy 901/NO9901/1.4898; Incoloy 25-6Mo/NO8926/1.4529/Incoloy 926/Alloy 926; Inconel 783/UNS R30783; NAS 254NM/NO8367; Monel 30C Nimonic 80A/Nickel Alloy 80a/UNS N07080/NA20/2.4631/2.4952 Nimonic 263/NO7263 Nimonic 90/UNS NO7090; Incoloy 907/GH907; Nitronic 60/Alloy 218/UNS S21800; | |
| ASTM A182 F51/UNS S31803, F53/UNS S32750,F55/UNS S32760 F904L/NO8904/1.4539; 254SMO/F44/S31254/1.4547 724L;725LN/310MoLN | |
| Packing | Wooden cases, pallets, nylon bags or according to the customers' requirements |
| MOQ | 1pcs |
| Delivery time | 10-100 days depending on quantity |
| Payment terms | L/C,T/T |
| Shipment | FOB Tianjin/Shanghai, CFR, CIF etc |
| Application | Petroleum/Power/Chemical/Construction/Gas/Metallurgy/Shipbuilding etc |
| Remarks | Other materials and drawings are available. |
| Welcome to contact us. BOYUE GROUP Co.,Ltd (12 years manufacturing experience) | |
Inconel 625 Flanges Specifications
| Specifications | ASTM B564 / ASME SB564 |
| Size | 1/2″NB TO 60″NB |
| Standards | ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc. |
| Class / Pressure | 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc. |
| Standard | ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc. |
Quick Details
Place of Origin:Zhejiang, China (Mainland)
Brand Name:BoYue
Model Number:ASTM B564
Size:1/2"-24"
Material:Inconel625 UNS N06625
Standard:ASME
certificate:ISO9001
surface:CNC machined
Application:
Petroleum,Chemical industry,Environment protection equipment,
Pressure:150#-2500#
Standard or Nonstandard:Standard
Supply Ability:
10000 Piece/Pieces per Month urgent order we can supply overtime sevice
Packaging & Delivery:Packaging DetailsPlastic bag in bundle,Wooden box,etc.
Port:SHANGHAI ,TIANJIN
| PRODUCT TYPES | Flanges: Weld Neck flange, Slip On flange, Blind flange, Threaded flange, Socket Weld flange, Lap Joint flange, Ring Joint flange, Plate flange, Spectacle blind, LWN, Tube Sheet, Orifice flange, Anchor flange. |
| Pipe Fittings: Elbow LR/SR, 45°/90°/180°;Tee Straight/Reducing; Reducer Concentric/Eccentric; Cross; Cap; Saddle | |
| STANDARDS | ANSI B16.5; ANSI/ASME B16.9; ASME B16.11; ASME B16.47, AWWA C207; EN1092-1; DIN; GOST; JIS B2220; JIS B2311; BS4504; BS10; UNI; SABS 1123 |
| MATERIALS | Carbon Steel: Flanges:-ASTM A105/105N; A36; A694 F42-F70; A350 LF1/LF2; P235GH; P245GH; P250GH; P265GH; P280GH; ST37.2; S235JR; C22.8; CT20; CT3; SS400; SF390A; SF440A; |
| Stainless Steel: Flanges: ASTM A182 F304/304L; F316/316L; F321; F51; 12X18H10T; 10X17H13M2T; SUS F304/F304L; F316/F316L; 1.4301;1.4306; 1.4401; 1.4404; 1.4521; 1.4571; Pipe Fittings: A403 WP304/304L; WP316/316L; WP317/317L; WP321; 1.4301;1.4306; 1.4401; 1.4404; 1.4521; 1.4571; SUS304/304L; SUS316/316L; SUS321; 08X18H10; 03X18H11; 12X18H10T; 10X17H13M; 10X17H13M2T | |
| Alloy Steel: Hastelloy Inconel 625 ASTM B564 / ASME SB564 ASTM A182 F11/F12/F22; 09T2C; 15X5M; SFVA F1/F1A | |
| PRESSURE | 150LB-2500LB; PN6-PN300; 1K-30K; |
| WALL THICKNESS | SCH5,SCH10S,SCH10,SCH20,SCH30,STD,SCH40,XS,SCH60, SCH80,SCH100,SCH120,SCH140,SCH160,XXS |
| SIZE | DN10-DN3000; 1/2"-144"; 10A-1500A; |
| SURFACE FINISH | Electroplate; H.D.G.; Yellow paint; Black Paint; Anti-rust oil |
Inconel 625 Flanges Test Certificates
We provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc
Material Testing:
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and MacroTest
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Package and Delivery
Lead Time :
| Quantity(Pieces) | 1 - 100 | >10 |
| Est. Time(day) | 15 | To be negotiated |
Product Attribute
| Place of Origin | China | Brand Name | BOYUE |
| Standard | ASME B16.5 | Type | Threaded Flange |
| ModelNumber | Inconel 825 Alloy | Thickness | #600 #900 #1500 |
| Packing | Ply-Wood Cases | Payment | 30%TT+70% Balance |
Packaging & Delivery
Packaging Details:Generally plywooden case or following customer's requirement.
Port:Shanghai/Tianjin
Product Description
| Material | F304, 304L, F316, F316L, F321, 316Ti, 317L, 347, F5, F9, F11, F22, LF2, A105, 1.4541, 1.4571, 1.4404, 1.4307 and P250GH. |
| Size | from 1/2"-84" |
| Standard | ANSI, DIN, JIS, BS, SH, BS4504, EN1092-1, BS3293 and other standards. |
| type | WN,SO,BL,SW,LJ,TH, |
| packing | plywood case, pallet or according to customers’ requirements |
| certificate | TUV&ABS, ISO9001:2000, Pressure Equipment Directive PED 97/23/EC, and BV and AD2000-Merkblatt WO |
| Sealing surface | FF ,RF, LJ, FM ,R.T.J and so on |
Why Choose Us
1.One-Stop Service,One Single Source.
2.No MOQ.
3.Best quality,competitive price
4.Fast Reply.
5.On-Time Delivery
6.Professional sales and technical team .
FAQ
Q1: Are you a factory or a trade company?
A1: We are a professional manufacturer for designing and producing of Large-size products.(View Mor)
Q2: Do you make customized products or finished parts?
A2: All parts are custom made only, and in stock, we can produce based on your drawings.
Q3: Will my drawing be e after you get it?
A3: Yes, we will not release your design to third party unless with your permission.
Q4: What is the MOQ?
A4: Small order is acceptable, but the more, the cheaper.
Q5: How about the samples?
A5: We are happy to make prototype part or sample for clients to ensure quality standard, but it’s charged according to your drawing.